ESD Protection Diode Failure Modes And Precautions For Use
Home » News » News » ESD Protection Diode Failure Modes And Precautions For Use

ESD Protection Diode Failure Modes And Precautions For Use

Views: 0     Author: Site Editor     Publish Time: 2023-07-25      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

 

Products Description

 

The ESD (Electrical Suppression Diodes) protection diode is a semiconductor device used in a circuit to suppress electrostatic induction and transient overvoltage. ESD protection diode is an electronic component to prevent the damage caused by lightning strike, electrostatic discharge or arc of electronic components. It has the characteristics of small size, light weight, stable performance and so on, and is widely used in computer systems, communication equipment and industrial control equipment.

 

ESD923
 
Operating principle
 

 

ESD refers to the insulation failure of electronic equipment, that is, the damage accident caused by electrical reasons. Usually, lightning or other forms of electromagnetic interference causes damage to the internal components of the electronic equipment, resulting in the electronic equipment can not work normally. This type of failure is called an electric shock-type fault. When the electric shock phenomenon occurs, the power cord and the ground wire will produce the instantaneous high potential difference and lead to the abnormal electrification of the equipment shell. Therefore, in order to ensure personal safety, the surge-in-storage device must be installed to prevent such incidents.

 

ESD23

 

Failure mode

 

The ESD protection diode may fail during use. The common failure modes are mainly the following:

1. Inhibition circuit failure: When the ESD protection diode is overactivated or overrapidly activated, it may cause the inhibitory circuit to fail, thus failing to protect the protected parts from electrostatic discharge.

2. Open circuit: The ESD protection diode may fail due to excessive activation or excessively rapid activation, resulting in an open circuit state, when it will have no effect on the protected parts.

3. Short circuit: part of the ESD protection diode may appear short circuit when failure, which will cause it to cause unnecessary burden to the protected parts.

 

7368a967b5cbd1dc22da51ad5acb6105

When using ESD, note the following:

1. Ensure that the use limit of the ESD protection diode is not exceeded, including the maximum voltage, maximum current, and operating temperature.

2. It should be used in accordance with the correct pin layout, welding and mechanical installation guidelines to ensure stability and reliability.

3. When the ESD protection diode fails, it must be replaced immediately to maintain the protection.

 

Sign up for our newsletter

OUR PRODUCTS

ABOUT US

MORE LINKS

CONTACT US

F4, #9 Tus-Caohejing Sceience Park,
No.199 Guangfulin E Road, Shanghai 201613
Phone: +86-13654948860
Fax : +86-21-67689607
Email: trade@yint.com.cn

SOCIAL NETWORKS

Copyright © 2024 Yint Electronic All Rights Reserved. Sitemap. Privacy Policy. Supported by leadong.com.