S05-5K0-RJ45/RJ45K

0 evaluate

It is mainly suitable for routers or POE equipment in computer networks, electronic equipment in data systems such as servers and workstations, and various video surveillance equipment connected through the network. It can prevent permanent damage or instantaneous interruption to signal equipment or systems caused by induced overvoltage, overcurrent and other instantaneous surge voltages caused by lightning strikes or industrial noise.

库存： 0

Inquire

Add to Basket

Description
Wiring diagram
Technical Parameters

Schematic diagram

微信图片_20240511095128

微信图片_20240511095132

Dimension

微信图片_20240511095136

Model	S05-5KO-RJ45(RJ45K)
According to standards: GB/T18802.11(IEC61643-21)	C2
Nominal voltage (Un）	5V
Maximum continuous operating voltage (Uc)	8V
Nominal discharge current (8/20μs) [ln]	2.5KA
Voltage Protection Level (Up)[Line to Line]	45V
Voltage Protection Level (Up)[Line to Ground]	500V
Transmission rate	100MHZ/1000MHZ
Insertion loss	≤0.5dB
Response time (t）	≤1ns
Operating temperature range (Tu)	-40℃~+70°C
Protect line	1, 2, 3, 6 lines/1, 2, 3, 4, 5, 6, 7, 8 lines
Applicable network equipment	100MHz Ethernet equipment/1000MHz Ethernet equipment
Maximum load current	0.4A/per pair of lines
Minimum installation conductor cross-sectional area	0.5mm² single strand/multiple strands
Maximum installation conductor cross-sectional area	4mm² (PE side) single strand/multiple strands
Installation method	35mm DIN rail according to EN 60715
Shell material	Gray thermoplastic, UL94 V-0
Installation Location	Indoor
Protection level	IP20
Size	1.35 digital analog, DIN 43880
Relative humidity	≤95% no condensation

S05-5K0-RJ45/RJ45K

OUR PRODUCTS

ABOUT US

MORE LINKS

CONTACT US

SOCIAL NETWORKS