ENERGY STORAGE SYSTEM CAN BUS EMC CIRCUIT DESIGN RECOMMENDATIONS
Home » News » ENERGY STORAGE SYSTEM CAN BUS EMC CIRCUIT DESIGN RECOMMENDATIONS

ENERGY STORAGE SYSTEM CAN BUS EMC CIRCUIT DESIGN RECOMMENDATIONS

Views: 0     Author: Site Editor     Publish Time: 2024-04-19      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

New energy energy storage systems are related to the sustainable development of energy in human society.  The stability and reliability of products are key to the industry. Characteristic requirements; signal transmission  between the battery pack and the system BMS, there are two main solutions, daisy chain and CAN BUS  busWay. 

Controller Area Network CAN (Controller Area Network) belongs to the field bus category and is an effective  support Serial communication network supporting distributed control systems.


图片


Controller Area Network CAN (Controller Area Network) It belongs to the  category of fieldbus and is a serial  communication network that effectively supports distributed control  systems.



图片1

Due to its high performance, high reliability and unique design, it has attracted more and more attention and  is widely used in many fields. And be able to detect any errors that occur. When the signal transmission  distance reaches 10km, CAN can still provide a data transmission rate of up to 50kbit/s. Because the CAN bus has high real-time performance and application range, it can be used in any combination from a high-speed network with a bit rate up to 1Mbps to a low-cost multi-line 50Kbps network. Therefore,  CAN has been widely used in the automotive industry, aviation industry, industrial control, safety protection  and other fields.

An application of CAN BUS in BMS system:

图片3



图片4

Recommended plan

微信图片_20240419141627

       ESD device functions and recommendations: 

       The role of ESD devices is to prevent chip damage caused by static electricity or surges to meet 

       relevant industry standards, such as IEC61000-4-2, ISO10605, etc. 

       ESD devices placed close to interfaces or connectors


Sign up for our newsletter
Subscribe

OUR PRODUCTS

ABOUT US

MORE LINKS

CONTACT US

F4, #9 Tus-Caohejing Sceience Park,
No.199 Guangfulin E Road, Shanghai 201613
Phone: +86-18721669954
Fax : +86-21-67689607
Email: global@yint.com.cn

SOCIAL NETWORKS

Copyright © 2024 Yint Electronic All Rights Reserved. Sitemap. Privacy Policy. Supported by leadong.com.