P6KE100A Alternative / Equivalent / Replacement

YINT Electronics — 600W TVS Diode for 100v dc rail Protection

Target Keywords: P6KE100A alternative, P6KE100A equivalent, P6KE100A replacement, P6KE100A substitute, P6KE100A cross reference

SEMrush Data: Estimated — Common 85.5V TVS voltage with broad industrial search demand

1. Introduction

The P6KE100A is a 600W unidirectional TVS diode for 100V DC rail protection in industrial control, telecom, and power supply equipment. It clamps transients from lightning, inductive load switching, and ESD events.

The P6KE100A is a JEDEC-registered industry standard number, cross-compatible with Littelfuse, Vishay, ON Semi, Diodes Inc, STMicroelectronics, and Bourns. YINT Electronics manufactures it as a drop-in replacement in the DO-15 package.

Engineers looking for a P6KE100A replacement or P6KE100A alternative can specify the YINT P6KE100A directly. It offers less than 1ns response time and 600W peak pulse power for standard systems.

2. Key Features

• Peak Pulse Power: 600W — 10/1000µs waveform for rail protection
• Stand-off Voltage: 85.5V — Non-conducting under normal operation
• Breakdown Range: 95.0V ~ 105.0V — Tight tolerance across production lots
• Max Clamping Voltage: 137.0V — Low clamping for downstream protection
• Reverse Leakage: 1.0µA max — Minimal standby power consumption
• Response Time: < 1ns — Instant ESD and transient suppression
• Surge Current: 4.50A — 10/1000µs peak pulse capability
• Operating Temp: -55°C to +150°C — Industrial grade reliability
• Package: DO-15 — Industry standard footprint
• RoHS Compliant — Lead-free and environmentally safe

3. Specifications

4. Cross Reference

The P6KE100A is a JEDEC-registered industry standard. YINT version is a direct drop-in replacement for all major brands including Littelfuse, Vishay, ON Semi, Diodes Inc, STMicroelectronics, Bourns, MCC, Good-Ark, and Taiwan Semiconductor.

5. Comparison with Similar Models

The P6KE100A provides an excellent balance of power, surge current, and package size. Choose the right TVS based on your DC rail voltage and surge protection requirements. For higher power, consider the 1500W package options. For SMD designs, look at the SMA/SMB footprint alternatives.

6. Applications

• DC power rail protection in industrial control and PLC systems
• Telecom equipment converter input protection
• Switching power supply transient clamping
• DC/DC converter input and output stage surge suppression
• Motor drive and servo control transient suppression
• Battery management system protection
• LED driver power rail transient protection
• Solar MPPT charger controller bus protection

7. Why Choose YINT

• 19+ years of circuit protection expertise since 2006
• 40+ patents and full process control per MIL-STD and JEDEC standards
• Direct drop-in replacement from all major brands
• Engineering team available for cross-reference support
• Free samples for testing on request
• Factory-direct pricing with volume discounts

8. Ordering Information

P6KE100A in DO-15 package. Tape packaging available. Contact YINT for specific quantities and delivery.

9. FAQ

Q1: Is YINT P6KE100A a direct replacement?
A: Yes. Matches all electrical specs and package dimensions.

Q2: Difference between A and CA suffix?
A: A is unidirectional for DC circuits. CA is bidirectional for AC circuits.

Q3: Peak pulse power rating?
A: 600W for 10/1000µs waveform at 25°C.

Q4: What voltage rails?
A: DC rails up to 85.5V continuous.

Q5: Free samples?
A: Yes. Contact YINT with your requirements.

10. Conclusion

YINT Electronics P6KE100A TVS diode is a reliable replacement for industry-standard models. It offers 600W peak pulse power and 137.0V clamping voltage for robust protection.

Contact YINT Electronics at global@yint.com.cn for datasheets and samples.